Suspension

KW 80mm Spanner Wrench

Models Include:
Universal - works with KW coilovers with a 80mm square notch perch

400C is a 33% duty cycle compressor that works quickly and efficiently putting out 2.54 CFM flow at zero PSI head pressure. Features include a standard 1/4" NPT stainless steel braided leader hose with inline check valve and insulated wiring for simple installation.

Models Include:
Universal

400C Dual Performance Value Packs include two 400C compressors, two heavy duty 40-amp relays and a 110 PSI cut-on, 145 PSI cut-off pressure switch. Each Dual Performance Value Pack comes with remote mount filter assemblies and mounting hardware. Dual Performance Value Packs are rated to fill tank volumes up to 10 gallons.

Models Include:
Universal

450C is a continuous duty cycle compressor. Features include a standard 1/4" NPT stainless steel braided leader hose with inline check valve and insulated wiring for simple installation.

Models Include:
Universal

480C is a truly rated, 200 PSI-rated compressor. It features horizontal cooling fins and a trapezoidal head design, a standard 3/8" stainless steel braided leader hose with 3/8" NPT inline check valve and insulated wiring.

Models Include:
Universal

Parker Brass Hex Nipples allow you to connect water traps, check valves, etc.

Models Include:
Universal

Parker Brass Reducers allow you to reduce down to a smaller size for fitting hex nipples, compressors, water traps, check valves, etc.

Models Include:
Universal

Parker Brass Reducers allow you to reduce down to a smaller size for fitting hex nipples, compressors, water traps, check valves, etc.

Models Include:
Universal

Water traps keep moisture from building up in your manifolds and valves. Simply put between the compressor and tank or between the tank and manifold or both. Additional fittings may be required such as hex nipples and reducer bushings for proper fitment (sold separately).

Models Include:
Universal

Water traps keep moisture from building up in your manifolds and valves. Simply put between the compressor and tank or between the tank and manifold or both. Additional fittings may be required such as hex nipples and reducer bushings for proper fitment (sold separately).

Models Include:
Universal

Water traps keep moisture from building up in your manifolds and valves. Simply put between the compressor and tank or between the tank and manifold or both. Additional fittings may be required such as hex nipples and reducer bushings for proper fitment (sold separately).

Models Include:
Universal

A check valve is sometimes referred to as a "non-return valve." This type of valve will allow air to flow in one direction only. Throw one of these guys on the supply line(s) to the manifold to prevent back flow.

Models Include:
Universal

A check valve is sometimes referred to as a "non-return valve." This type of valve will allow air to flow in one direction only. Throw one of these guys on the supply line(s) to the manifold to prevent back flow.

Models Include:
Universal

SMC Female Straight fittings are female NPT on one side, and PTC (Push to Connect) on the other. SMC fittings feature a metal sleeve which aligns with the inside of the air line, providing an improved seal.

Models Include:
Universal

SMC Male Straight fittings are male NPT on one side, and PTC (Push to Connect) on the other. SMC fittings feature a metal sleeve which aligns with the inside of the air line, providing an improved seal.

Models Include:
Universal

KW 100mm Spanner Wrench

Models Include:
Universal - works with KW coilovers with a 100mm square notch perch

KW 75mm Spanner Wrench

Models Include:
Universal - works with KW coilovers with a 75mm round notch perch

380C is a truly-rated continuous duty, 12-volt, 200 PSI compressor. It is capable of filling a 5.0-gallon tank from 165 PSI to 200 PSI in 3 1/2 minutes consistently, while never pulling more than 23 amps of power (@ 13.8 volts). Features include a standard 1/4" stainless steel braided leader hose with 1/4" NPT inline check valve and insulated wiring.

Models Include:
Universal

Air Lift Performance compressor isolation brackets. These brackets are designed to work with the VIAIR 380, 400, 444, 450, 480 model compressors and feature a high quality powdercoat finish. By securing your compressor with our spring loaded rubber mounts vibration is drastically reduced, resulting in whisper quiet compressor operation. Simply mount the brackets to your compressor and install in your vehicle.

Models Include:
Universal - works with VIAIR compressors 380, 400, 444, 450, 480