Call 888-633-5237

Your Aftermarket Automotive Source...

  • Choose Your Car:

Hawk High Performance Street Compound Brake Pads (Front)

SKU: HB641F.696

Availability: ships in 24-48 hours

Manufacturer's Suggested Retail Price $161.36


Need help with your purchase?
Call us toll-free: 888-633-5237.

Have questions about this product?
Contact us via email.

Need international shipping?
Click here for details.


Price Match Guarantee!



Hawk High Performance Street Compound Brake Pads

Superior Stopping Power for the Street

HPS - High Performance Street disc brake pads are world renowned for increasing stopping power on your street legal vehicle. Increasing the performance of your vehicles braking system is easy when you choose Hawk Performance’s HPS braking compound. This unique Ferro-Carbon formula was developed for street performance using the safety and quality of Aerospace and Motorsports severe-duty friction technology.

The High Performance Street compound offers a higher coefficient of friction over stock brake pads and can provide you 20-40% more stopping power and higher resistance to brake fade than most standard replacement pads. Less fade means you will have a highly durable brake pad with less brake dust.

All Hawk Performance High Performance Street brake pads provide a limited lifetime warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.

Note: Hawk Performance burnishes its High Performance Street brake pads as a final step in the factory, but all brake pads have to be bedded-in with the rotors (new or used) that they will be used against. Properly bedding-in new brake pads results in a transfer film being generated at the pad and rotor interface to maximize brake performance.


Key Features:

  • Increased stopping power
  • High friction/torque hot or cold
  • Gentle on rotors
  • Extended pad life
  • Low dust
  • Virtually noise-free
  • Very quiet, low noise
  • Ideal for import and domestic automobiles



  • Location = Front
  • Sold as a pair (front axle set)
  • Wear sensors = No


Bed-in / Burnishing Instructions:

  • 1. After installing new brake pads, make 6-to-10 stops from approximately 30-35 MPH applying moderate pressure.
  • 2. Make an additional 2-to-3 hard stops from approximately 40-45 MPH.
  • 4. Allow at least 15 minutes for the brake system to cool down.
  • 5. After step 4 is completed, your new Hawk Performance brake pads are ready for use.

Additional Info

Additional Info

Weight 2.0000
Box Size N/A
Manufacturer Hawk
Country of Manufacture United States
USA Location Chino, CA
Warranty Limited Lifetime Warranty, ensuring products to be free of defects from manufacturer’s workmanship and materials.
Installation Instructions (PDF) N/A
Rebates (PDF) N/A

Application Guide

Make Model Drivetrain Chassis / Year Engine
Audi A4 All B8 (2009-PRESENT) All
Audi A5 All B8 (2008-PRESENT) All
Audi Allroad Quattro C7 (2012-PRESENT) 2.0T
Audi S4 Quattro B8 (2010-PRESENT) 3.0T
Audi S5 Quattro B8 (2008-PRESENT) All
Audi Q5 All (2009-PRESENT) 2.0T, TDI, 3.2L


Write Your Own Review

You're reviewing: Hawk High Performance Street Compound Brake Pads (Front)

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars

You may also be interested in the following product(s)