Call 888-633-5237

Your Aftermarket Automotive Source...

  • Choose Your Car:

Exhaust

Items 1 to 20 of 31 total

per page

Page:
  1. 1
  2. 2
  • 42 Draft Designs O2 Sensor Spacer

    1 Review(s)

    When an aftermarket high-flow catalytic converter is used on a late model car its common to see a CEL (Check Engine Light) come and go. This CEL is usually backed by a fault code that indicates a failed cat. If your new cat is NEW, how could it have failed? Behind the scenes, the factory ECU is comparing the readings from a pair of oxygen sensors to measure the effectiveness of the cat. When a high-flow cat is used the exhaust gases are able to pass by the cat at a much faster rate, disrupting the readings.

    Models Include:
    Universal - M18x1.5mm

    Learn More
    $48.00

    made to order, ships in 3-5 days


  • AWE Tuning Performance Downpipe for Audi & VW 2.0T (200 Cell Metal Cat)

    We spent considerable time examining how to maximize the performance and options of this exhaust system. The factory exhaust consists of a long downpipe with two catalytic converters, and two rather large mufflers in the section after the cats.

    Models Include:
    Audi A3 8P (2006-2013) FWD 2.0T
    Volkswagen GTI MK5 (2006-2009) 2.0T
    Volkswagen GTI MK6 (2010-2014) 2.0T
    Volkswagen Jetta GLI MK5 (2005-2009) 2.0T
    Volkswagen Jetta GLI MK6 (2012-2013.5) 2.0T

    Learn More
    $1,095.00

    built to order, ships directly from AWE Tuning


  • Milltek Downpipe for Audi & VW 2.0T (with Hi-Flow Metal Cat)

    Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer.

    Models Include:
    Audi A3 8P (2006-2013) 2.0T
    Volkswagen CC (2009-PRESENT) 2.0T
    Volkswagen GTI MK5 (2006-2009) 2.0T
    Volkswagen GTI MK6 (2010-2014) 2.0T
    Volkswagen Golf R MK6 (2012-2013) 2.0T
    Volkswagen Jetta GLI MK5 (2005-2009) 2.0T
    Volkswagen Jetta GLI MK6 (2010-2013.5) 2.0T
    Volkswagen Passat B6 (2005-2011) 2.0T

    Learn More
    $979.00

    ships in 24-48 hours


  • Milltek Downpipe for Audi & VW 2.0T (without Cat)

    Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer.

    Models Include:
    Audi A3 8P (2006-2013) 2.0T
    Volkswagen CC (2009-PRESENT) 2.0T
    Volkswagen GTI MK5 (2006-2009) 2.0T
    Volkswagen GTI MK6 (2010-2014) 2.0T
    Volkswagen Golf R MK6 (2012-2013) 2.0T
    Volkswagen Jetta GLI MK5 (2005-2009) 2.0T
    Volkswagen Jetta GLI MK6 (2010-2013.5) 2.0T
    Volkswagen Passat B6 (2005-2011) 2.0T

    Learn More
    $489.00

    ships in 24-48 hours


  • 42 Draft Designs Catback Exhaust for VW GTI MK5 (2.5" Flanged) (Aluminized Steel) (Double Wall Tips)

    Turbocharged horsepower requires serious exhaust. Maximum power starts with a big downpipe and ends with an equally free flowing exhaust system. Designed to bolt to our 3" FSI/TSI downpipes, our 2.5" & 3" cat-backs pick up where the downpipe leaves off. The result is honest performance that sounds and looks as great as it feels.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T FSI & TSI

    Note:
    Designed to bolt up to 42 Drafts Designs 3" downpipe.

    Learn More
    $565.25

    built to order, ships directly from 42 Draft Designs


  • 42 Draft Designs Catback Exhaust for VW GTI MK5 (2.5" Flanged) (Aluminized Steel) (Single Wall Tips)

    Turbocharged horsepower requires serious exhaust. Maximum power starts with a big downpipe and ends with an equally free flowing exhaust system. Designed to bolt to our 3" FSI/TSI downpipes, our 2.5" & 3" cat-backs pick up where the downpipe leaves off. The result is honest performance that sounds and looks as great as it feels.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T FSI & TSI

    Note:
    Designed to bolt up to 42 Drafts Designs 3" downpipe.

    Learn More
    $536.75

    built to order, ships directly from 42 Draft Designs


  • Borla Catback Exhaust System for VW, GTI, MKV

    The performance advantages of a BORLA® are widely recognized. The top engine builders in the racing world rely on BORLA® exhaust for maximum performance. In fact, BORLA® is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine's power, but in some instances actually add power.

    Models Include:
    Volkswagen GTI MKV (2006-2009) 2.0T

    Learn More
    $722.02

    ships in 24-48 hours


  • Magnaflow Catback Exhaust for VW, GTI, MKV

    MagnaFlow got its start as a natural extension of Car Sound Exhaust systems. Our parent company specializes in superior catalytic converter technology and has spent the last 30 years earning its reputation as a market leader around the world. We’re proud to continue this tradition through producing the best sounding, best performing and most durable exhaust components in the world.

    Models Include:
    Volkswagen GTI MKV (2006-2009) 2.0T

    Learn More
    $715.57

    ships in 24-48 hours


  • Neuspeed Catback Exhaust System for VW GTI MK5 (70mm)

    NEUSPEED's all-stainless catalyst-back exhaust system rivals the best that Europe has to offer! Our latest generation of exhausts use 70mm tubing for maximum flow. Low restriction mufflers and resonators are carefully designed to reduce weight and meet State noise restriction standards.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T

    Learn More
    $949.95

    ships in 24-48 hours


  • 42 Draft Designs Catback Exhaust for VW GTI MK5 (3" Flanged) (Aluminized Steel) (Single Wall Tips)

    Turbocharged horsepower requires serious exhaust. Maximum power starts with a big downpipe and ends with an equally free flowing exhaust system. Designed to bolt to our 3" FSI/TSI downpipes, our 2.5" & 3" cat-backs pick up where the downpipe leaves off. The result is honest performance that sounds and looks as great as it feels.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T FSI & TSI

    Note:
    Designed to bolt up to 42 Drafts Designs 3" downpipe.

    Learn More
    $565.25

    built to order, ships directly from 42 Draft Designs


  • 42 Draft Designs Catback Exhaust for VW GTI MK5 (3" Flanged) (Aluminized Steel) (Double Wall Tips)

    Turbocharged horsepower requires serious exhaust. Maximum power starts with a big downpipe and ends with an equally free flowing exhaust system. Designed to bolt to our 3" FSI/TSI downpipes, our 2.5" & 3" cat-backs pick up where the downpipe leaves off. The result is honest performance that sounds and looks as great as it feels.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T FSI & TSI

    Note:
    Designed to bolt up to 42 Drafts Designs 3" downpipe.

    Learn More
    $593.75

    built to order, ships directly from 42 Draft Designs


  • Torque Solution O2 Sensor Extender (Straight)

    This Steel O2 sensor extender is basically for keeping the O2 sensor out of exhaust pipe. These also work when running a hi flow cat or a test pipe. It's a very simple 10~15 mins installation, This extender will fit most O2 sensors with 18mm thread size.

    Models Include:
    Universal

    Learn More
    $12.99

    ships in 24-48 hours


  • Torque Solution O2 Sensor Extender (45° Degree)

    The second O2 sensor is there to make sure the catalytic converter is doing it's job properly. By Utilizing the Torque Solution 45 Degree O2 Sensor Extender to move the second O2 out of the exhaust stream on modified vehicles it will reduce / prevent the risk of throwing a CEL.

    Models Include:
    Universal - M18x1.5mm

    Learn More
    $24.99

    ships in 3-5 days


  • Torque Solution O2 Sensor Spacer (90° Degree)

    The second O2 sensor is there to make sure the catalytic converter is doing it's job properly. By Utilizing the Torque Solution 90 Degree O2 Sensor Spacer to move the second O2 out of the exhaust stream on modified vehicles it will reduce / prevent the risk of throwing a CEL.

    Models Include:
    Universal - M18x1.5mm

    Learn More
    $28.99

    ships in 24-48 hours


  • Milltek Non-Resonated Section for Audi A3 8P & VW GTI MK5

    Looking for a little more sound out of your exhaust? If you already own a Milltek resonated exhaust and would like to change it to a non-resonated exhaust, all you need to do is purchase the non-resonated section. Get more growl out of your Audi 8P A3 and VW MK5 GTI with this simple non-resonated replacement pipe.

    Models Include:
    Audi A3 8P (2006-2013) FWD 2.0T FSI & TSI
    Volkswagen GTI MK5 (2006-2009) 2.0T FSI & TSI

    Learn More
    $200.43

    ships in 24-48 hours


  • Rieger Quad Exhaust for VW GTI MK5

    1 Review(s)

    Rieger rear portion exhaust (silencer) with 4 tips, each 76mm in diameter on each side making it a Quad tip exhaust for the Rieger rear skirt extension.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T

    Note:
    Fits Rieger rear skirt - sku: 59410 & 99742

    Learn More

    Regular Price: $786.00

    Special Price $432.00

    in stock, ships in 24-48 hours


  • Milltek R32 Style Catback Exhaust for VW, GTI, MKV (Resonated)

    Milltek MKV GTI 2.0T R32 Style Resonated Catback System. The system features twin centrally mounted 4" / 100mm tailpipes.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T

    Note:
    Requires AWE Tuning rear bumper conversion kit.

    Learn More
    $989.00

    ships in 24-48 hours


  • Milltek R32 Style Catback Exhaust for VW, GTI, MKV (Non-Resonated)

    Milltek MKV GTI 2.0T R32 Style Non-Resonated Catback System. The system features twin centrally mounted 4" / 100mm tailpipes.

    Models Include:
    Volkswagen GTI MK5 (2006-2009) 2.0T

    Note:
    Requires AWE Tuning rear bumper conversion kit.

    Learn More
    $859.00

    ships in 24-48 hours


  • Milltek Catback Exhaust for Audi A3 8P & VW GTI MKV (Non-Resonated)

    Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer.

    Models Include:
    Audi A3 8P (2006-2013) FWD 2.0T FSI & TSI
    Volkswagen GTI MK5 (2006-2009) 2.0T FSI & TSI

    Learn More
    $679.00

    ships in 24-48 hours


  • Milltek Catback Exhaust for Audi A3 8P & VW GTI MKV (Resonated)

    Milltek Sport exhausts are produced in high quality type 304 aircraft grade stainless steel. This material is anti-magnetic (other manufacturers stainless steel may not be) and is less susceptible to discolouration. This quality of stainless steel is used on all pipework and the total construction of the silencer.

    Models Include:
    Audi A3 8P (2006-2013) FWD 2.0T FSI & TSI
    Volkswagen GTI MK5 (2006-2009) 2.0T FSI & TSI

    Learn More
    $779.00

    ships in 24-48 hours


Items 1 to 20 of 31 total

per page

Page:
  1. 1
  2. 2